Product categories

Planet BSP-115PV-15A solar PoE+ switch, 5x1Gb, 1x1Gb SFP, 5x PoE+ 802.3at, -20~65°C, IP30, LCD display

Akce
6 156 CZK 5 087 CZK without VAT
Common price: 7 026 CZK

In stock To send

Personal pickup at place
Ostrovačice Not in stock
Code: NETPLA2561 PN: BSP-115PV-15A Warranty: 38 months
Výrobce: PLANET Technology
 (Planet Technology)
11F, No. 96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
sales@planet.com.tw
www.planet.com.tw
PLANET BSP-115PV-15A Solar-powered PoE+ switch with integrated MPPT controller offering 5× RJ-45 10/100/1000 Base-T with PoE+ IEEE 802.3af/at (35 W/port), 120 W PoE budget, DIP switch and 1× SFP 100/1000 Base-X. LCD display... more
PLANET BSP-115PV-15A

Solar-powered PoE+ switch with integrated MPPT controller offering 5× RJ-45 10/100/1000 Base-T with PoE+ IEEE 802.3af/at (35 W/port), 120 W PoE budget, DIP switch and 1× SFP 100/1000 Base-X. LCD display for power information.
1× 6-pin terminal block (removable), pins 1/2, 3/4 for PV (photovoltaic) panels + certain types of generators (hydro or wind), pins 5/6 for battery charging/discharging. The PV input is compatible with DC input but must not be connected simultaneously with the solar input to avoid damage to the device. A DIP switch on the front panel allows configuration of PoE and VLAN. The DIP switch on the rear panel is used to set the battery type and voltage.
ESD protection up to 4 kV (contact), up to 8 kV (air), temperature sensor (detection -20 to 100 °C), IP30 rating (metal housing), fanless, wall or desktop mounting, operating temperature -20 to +65 °C.

A solar PoE switch that supports simultaneous use of solar (PV) and battery power. Energy harvested from the solar panel is stored in a 12 V or 24 V battery. When solar power is unavailable, the battery is used to power the switch and connected devices.

This solution provides the ability to power connected active devices such as IP cameras, switches, converters or Wi-Fi units continuously and independently of the power grid. The application is therefore suitable for surveillance in parks, forests, cabins or large agricultural and industrial areas. Thanks to uninterrupted power supply, it can also be used as a means of building telecommunication points for local internet service providers.

Battery management:

  • Supports lithium (Lithium, Li-Fe) and lead-acid (Lead-acid, Pb) batteries, selectable
  • Input power (PV IN): min. voltage 20–27 V DC (12V battery), 32–45 V DC (24V battery), max. current 15 A, power up to 405 W (for 12V battery, 675 W for 24V battery)
  • Easy diagnostics of system operating status via LED indicator
  • Current battery usage status
  • MPPT (Maximum Power Point Tracking) charge controller
  • Reverse current protection (prevents reverse current flow into the photovoltaic panel)
  • Overcurrent protection and reverse polarity protection (for battery and charging terminals)

BASIC SPECIFICATIONS

Physical properties:

Ports: 5× RJ-45 10/100/1000 Base-T with PoE+ IEEE 802.3af/at, 1× SFP Base-X
Memory: 2K MAC addresses, 2.5 Mb buffer
Throughput: 12 Gbps switching fabric, 8.92 Mpps forwarding rate (64B)
Form factor: Desktop, wall-mount
Power supply (switch): via photovoltaic panels (DC 20–45 V) or battery (DC 12/24 V), total power consumption up to 140 W (full load with PoE power)
Power requirements:
Solar panel: 20–27 V DC (12V battery), 32–45 V DC (24V battery)
Battery: 12/24 V, lithium (Lithium, Li-Fe) and lead-acid (Lead-acid, Pb) batteries
Power output: 5× PoE+ RJ-45, 6-pin terminal block (2× input for PV panel, 1× power input/output for 12/24V battery)
Protection: ESD up to 4 kV contact, 8 kV air (ethernet)
Operating temperature: -20 to +65 °C
Dimensions: 197 × 142 × 34 mm
Weight: 820 g

PoE features:

Total power budget: up to 120 W, 802.3af/at
Number of injectors: 5× up to 35 W
Power type: End-span
Advanced features:

  • inter-port interference circuit protection
  • automatic powered device detection
  • powered device activity detection, if no response, device can be restarted by power cycling (PD alive check)
  • Extended mode 10 Mb/s with range up to 250 m
  • The switch features a manual mode selector switch:

    • Alive check - monitors the status of connected devices in real time; when a device stops responding, power is cycled to restore it to operation.
    • VLAN - ports are logically isolated from each other; this mode can prevent unwanted multicast and broadcast storms.
    • Extend - the switch powers devices up to 250 m with reduced throughput of 10 Mb/s per port.









    Other downloads

    Brand
    Type specification :  Switch
    Manufacturer :  PLANET Technology
    Technical specification
    Fanless :  yes
    Homologation EN50155 :  no
    IGMP :  no
    Switching capacity (Gbps) :  12
    Management :  no
    Standard :  802.3at
    Standard :  802.3af
    PoE features :  Extended 10Mb
    PoE features :  PD alive
    PoE-in :  no
    PoE-out :  802.3af/at
    PoE-out (quantity) :  5
    Outdoor use :  no
    Max. operating temperature (°C) :  65
    Min. operating temperature (°C) :  -20
    Placement :  wall mount
    Placement :  desktop
    Switch throughput (Mpps) :  8,92
    Stackable :  no
    Ingress protection :  IP30
    OSI layer :  L2
    Display
    Display :  yes
    Network interfaces
    Gigabit LAN :  yes
    LAN :  yes
    Number of PoE ports :  5
    Port Speed :  1 Gb/s
    Inputs and outputs
    RJ-45 :  5
    RS-232 :  no
    Power supply
    Power type :  battery
    Power type :  solar
    PoE support :  yes
    Input Voltage (V) :  20 - 45 (DC)
    Physical properties
    Color :  blue
    Weight (g) :  820
    Dimensions :  197 × 142 × 34 mm
    Additional equipment and features
    Certification mark :  FCC Part 15 Class A, CE
    Warranty
    Warranty period EU (months) :  38
    Warranty period CRN (months) :  38
    Reviews can only be added by logged-in users who have purchased the product

    Similar products

    Scroll